Jung FMUS2UP Instructions D'utilisation page 13

eNet
eNet émetteur interfaces universel 2 voies mini
Settings window
Device settings
Parameter name
Manual commissioning
Repeater mode
Switching edge E1
Switching edge E2
82580833
j0082580833
Setting options, Basic set­
ting
On, Off
Basic setting: On
On, Off
Basic setting: Off
Rising, falling
Basic setting: Rising
Rising, falling
Basic setting: Rising
13/15
Explanations
Disables manual commissio-
ning for all device channels.
Note: In the "Off" setting, the
device cannot be reset to the
factory setting.
In addition to its other func-
tions, the device can be used
as a repeater. In the "On" set-
ting, the device repeats all the
received telegrams.
Specifies whether input 1
reacts to a rising or a falling
edge.
Rising: Control with NO
contact push-button
Falling: Control with NC
contact push-button
Specifies whether input 2
reacts to a rising or a falling
edge.
Rising: Control with NO
contact push-button
Falling: Control with NC
contact push-button
27.07.2016