Technical Data; Installation Of The Fireplace - Jotul Terrazza Manuel D'installation

ENGLISH
Safety precautions
Installation of the fireplace must be according to local
codes and regulations in each country. All local regulations,
including those which refer to national and European
standards, must be observed when installing the product.
Incidentally, the fireplace should be placed in a safe distance
to combustible materials, with respect to sparks / hot coals
and radiant.
You should talk to neighbours regarding the placing of the
fireplace regarding the smoke and smell.
NOTE: The fireplace must not be placed on the surface of
combustible materials!

Technical data:

Height: 118 cm
Width: 50 cm
Depth: 50 cm
Weight: 30 kg
Maintenance
The fireplace is produced in 2 mm Corten steel, which after
a short time gets a "rough" rust coating on the surface. This
type of steel is developed to obviate the need for painting,
and form a stable rust-like appearance if exposed to the
weather for several years.
NB: Rust can run down onto the surface and cause stains
that are difficult to remove. The surface should therefore
be covered to protect it.
The fireplace shall not be surface treated.

Installation of the fireplace:

Fig. 1
Put the steel plates towards each other (fig. 1 and 2).
8
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Attach the screws and nuts to the tracks as shown (fig. 3,
4, 5 and 6).