Insignia NS-15LCD Guide De L'utilisateur page 12

NS-15LCD 15-inch TV - combined.fm Page 11 Wednesday, March 29, 2006 5:16 PM
NS-15LCD 15" LCD TV
Caution For your safety and to avoid damage to the TV, unplug the antenna
cable from the ANT jack before moving it.
Note
Connecting to a wall jack
Connect the TV to the wall-mounted antenna jack with a 75 ohm RF
cable (commercially available).
Connecting to a wired antenna cable
Note Before plugging the antenna into the ANT jack on the TV, make
sure that the pin is not bent. If it is bent, straighten the pin, then
plug the cable into the ANT jack of the TV.
From outside antenna
CATV connection
Using a cable or satellite box
If your cable service supplies you with a converter box, or if you use a
satellite system, you can connect it to your TV with a 75 ohm RF cable
(commercially available).
Channel selection must be made with the converter box or satellite box,
so channels cannot be changed using the remote control of this TV.
• We recommend 75 ohm coaxial cable to eliminate
interference and double image due to the unmatched input
impedance of the antenna.
• The antenna/cable and power line should not be bundled
together.
INPUT
MENU
CH
VOL
www.insignia-products.com 11