Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4. I
NSTALLATION AND WORKING ENVIROMENT
While installing the follow situation are needed:
Dry: Do not put the inverters in rain, fog, frosty, water and greasy dirt oil are forbidden put on inverters.
•
Temperature: Please control the temperature between 5 – 35 °C
•
Safety: Do not put the inverters beside, explosive, inflammable and fuel oil engine.
•
Ventilate: At lease keep10cm space for ventilate, and do not jam the air-vent.
•
Dust: Do not put the inverter in dust and too much dust will destroy the inverter.
•
5. C
ONNECTING
1.
Check if the inverter is in off status. Connect the cable.
2.
Ensure the battery voltage and the inverter input voltage matching. 12V inverter can only work with 12V
battery and 24v inverter can only work with 24v battery, if mixed will destroy the inverter.
3.
Connect the positive terminal with the positive polar to the battery and the negative with the negative polar
and please keep the inverter in off status, that's very important for the inverter.
Warning: Keep the connecting fixed or will be very dangerous.
Checking the connection again before the next step
4.
Warning: Do not inversed connected it may destroy the inverter.
5.
Press the on button, the green light on and the digital display start work. If the inverter alarms please stop
the inverter and check!
6. F
OR SAFETY
Please read carefully before using:
Please do not operate the inverter while your hand is wet, Keep it from the touch of children.
•
The temperature of the shell will be high after longtime working, so do not touch it in case scalded;
•
Do not put metal into the inverter in case not to electric shock.
•
Because inverter is easy to emerge arc, do not put the inverters in rain, fog, frosty, water and greasy dirt oil
•
are forbidden put on inverters.
While connecting with battery, if the battery acidic material touches the skin please wash use water at once,
•
if the acidic material go into the eye please go to the hospital.
Please do not put metal on the battery, this will cause short circuit then destroy the inverter and the battery.
•
When insert the socket of the appliance to the AC outlet of the inverter please keep you hand away from
•
the metal pin, to avoid electric shock.
Please do not put any AC electric to the AC outlet of the inverter, this will destroy the inverter and may
•
cause electric shock.
Do not disassembly products, maintain need professional.
•
3
Publicité
Table des Matières
