Publicité
Les langues disponibles
Les langues disponibles
Top-set Assembly
Check Before Operating
•
Wash the parts before first use
•
Ensure that the silicone tab at the bottom of the juice bowl and the
silicone ring are assembled properly.
1. Firmly insert the compression silicone into the slot below the pulp spout.
Note: The juicer may leak if the tab and the silicone ring are not
properly assembled.
2. Place the strainer into the juicing bowl ensuring the red dot
•
on the strainer is aligned with the red dot
•
on the juicing bowl.
EN-9
Publicité
