Active Era LED SOLAR LIGHT LL-2 Mode D'emploi page 3

SPECIFICATIONS
-
Solar Panel
-
Battery Specification
-
Waterproof level
-
Product dimensions
-
Product Net Weight
NOTE
- This light will remain inactive during the day, regardless of mode. It
is designed for use in low-light conditions only.
- This unit utilises solar energy. Please choose a location that receives
a sufficient amount of natural light. The more natural light the unit
receives, the better the battery will charge.
- The light usually requires 8 hours of sunlight to charge fully. This
may vary due to weather and sunlight conditions.
INSTALLATION
1. Slide the switch to the desired lighting mode.
2. Select a suitable location to hang the unit and mark two drill holes.
3. Drill two pilot holes and insert the wall plugs provided.
4. Mount the unit using the screws provided ensuring the unit is level
and secure.
DISPOSAL
This marking indicates that this product should not be
disposed of with other household waste throughout the EU.
This is to prevent possible harm to the environment and
human wellbeing. Contact your local authority for
information regarding the collection systems available. If
possible, recycle it responsibly to promote the sustainable
reuse of resources.
5.5 V / 1W
3.7 V, 2200 mAh
IP65
171 x 105 x 50mm / 6.7" x 4.1" x 2"
237g / 8.4oz
English | 2