Basic Working Techniques - Husqvarna 326AI25 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Always wear heavy gloves when replacing the cutters.
The cutters are extremely sharp and can easily cause
cuts.
Store the machine out of reach of children.
Use only original spare parts for repairs.

Basic working techniques

Always ensure you have a safe and stable working
position.
Always hold the machine with both hands.
Place the tip of the drill on the ice.
Open the throttle gradually when the drill begins to
bite into the ice.
Keep a firm grip on the handles and be ready to
take the weight when the drill tip goes through the
ice.
When you have finished drilling for the time being, drill
a short distance into the ice so that the machine
stands up by itself. By leaving the machine like this
38 – English
WORKING TECHNIQUES
you reduce the risk of anyone accidentally coming into
contact with the cutters.
Always turn off the engine when you have finished
drilling.

Publicité

Chapitres

Table des Matières
loading

Table des Matières