Sony HVL-F32M Mode D'emploi page 31

• The distances in the above table assume the use of ISO 100. If ISO 400
is used, the distances must be multiplied by a factor of two (assume a
limit of 5 m).
Attaching the supplied mini-stand
Use the supplied mini-stand when the flash unit is separate from the
camera.
1
Open the supplied mini-stand.
The mini-stand is stored in the carrying case at the time of purchase.
2
Remove the protective cap from the terminal of the
Multi Interface foot of the flash unit.
3
Rotate the lock lever towards [RELEASE] while
pressing the release button.
31
GB