Pioneer F-91 Mode D'emploi page 9

USING THE PROGRAM MODE MEMORY
3. Checking memory contents
Press the CHECK button once, and the programs stored in the
program memory will be received for 2 seconds each with
sound will be output. After completing one cycle, the unit will
return to the condition before the CHECK button was pressed.
The PROGRAM indicator flashes during the checking.
Example:
Let's suppose 88.5 MHz has been memorized into 'I', 92.5 MHz
into 'Il' and 810 kHz into 'HI'. FM 97.5 MHz is being received
at present.
FM of WE OP MHz F
{ t,o! Lf tech
CHECK
Press the CHECK button
PM oO Ooc rm Me.
Ba.oé Sch
ic eeconics
t
PROGRAM
4. For memorizing just one or two programs
Enter the desired station(s), then press the SET button.
Example:
When memorizing just two stations.
Procedure Display
Tuner Operation
(1) Press the ON/OFF button to turn the
PROGRAM indicator on.
ON/OFF SET CHECK
10) e) e)
;
PROGRAM
The program mode
is enterd.
os res
(2) Press the SET button.
ON/OFF SET CHECK
1e) ce) [@)
t
PROGRAM
SET
Memory standby.
(3) Press the STATION CALL switch
corresponding to the station you want
to store in program |
(for example, channel 2)
2/14
PROGRAM
SET] _
Storage in Program
| completed.
(4) Press the STATION CALL switch
corresponding to the station you want
PROGRAM
SETI tl
Storage in Program
Il completed.
to store in program II
(for example, channel 5)
(5) Press the SET button.
ON/OFF SET CHECK
oO oO ce)
T
PROGRAM
When storage of
both stations is
completed, the
unit will enter the
standby mode.
e After activating the program 'SET', programs | — Il > |—
Whee, tees: will be alternately received each time power is turned
off and on.
e Ifyou press the CHECK button instead, stations | and II will
be received for 2 seconds each, then the unit will return to
the station it was receiving before.
e If you press the SET button twice in a row, the SET mode
will be canceled. (The previously input program will be
erased.)
¢ The SET mode is canceled when pressing any button except
the STATION CALL switches, CHECK button and the station
call selector.
e The SET and CHECK buttons only operate when program
MEMORY is on.
e The CHECK button cannot be used in the SET mode.
STATION CALL Switches ''Memo'"'
It is recommended that you make a note of the preset stations.
STATION CALL Switch No.
Name of broadcast station
Frequency
STATION CALL Switch No.
Name of broadcast station
Frequency
9
<ARE1054>