Low Water Alarm Function - Honeywell CS10XE Manuel Du Propriétaire

USE & OPERATION

LOW WATER ALARM FUNCTION

The unit is equipped with a low water sensor. When water in the tank is below the
minimum level, you will hear 10 beeps and the COOL LED indicator will flash
continuously. At the same time the power to the pump inside the unit will be cut off
to protect the life of the pump.
To disengage the alarm function, turn off and unplug the unit from the power
outlet. Fill the tank with water above the minimum level.
To turn off the Low Water Alarm and continue to use the unit as a normal fan,
without evaporative cooling function, turn the unit off, then on again. If the [COOL
is pressed again without filling the tank with water, the Low Water Alarm will
activate again.
11