Publicité
Les langues disponibles
Les langues disponibles
6. Set the time correction of sunset time "Set"
using
+
and -, then validate by enter.
7. Activate the astro mode by selecting On
using
+
and
-
then
switch on the control circuit automatically
according to the astronomical parameters.
8. For 2-way clock, select channel
using
+
or
-
and validate with enter.
The symbol
if the channel is in astro mode.
Programming
Programming may be done for each day or for a group of days.
In this case instructions are common to several days.
Days: 1 = Monday, 2 = Tuesday, 3 = Wednesday... 7 = Sunday.
1. Select the prog mode using menu, then enter.
2. Select the channel
(Only applicable to 2-channel clock: TWA-2).
The number of remaining program steps appears for a short time.
3. new flashes, press
4. Choose the day(s) using
5. ok flashes. Use
-
or
makes it possible to reset the group of days if necessary.
6. Using
+
or -, select instruction state:
On or Off if your are in automatic astronomical mode.
On, Off, On
All manuals and user guides at all-guides.com
enter
to have the product
C1
on main display will indicate
(C1
or C2) using
enter
to validate this new program steps.
+
or -. Validate with enter.
enter
to validate the group of days.
or Off
if your are in expert mode.
or
C2
+
or
-,
then press enter.
7
Publicité
