Canon K10297 Guide D'utilisation page 29

6
Use the numeric buttons, or [ ] or [ ] to enter the number of times you want the
fax to redial, then press [Start] twice. The LCD displays <2MIN.>.
7
Use the numeric buttons, or [ ] or [ ] to enter the time interval between redialing
attempts, then press [Start].
8
Press [Stop].
The fax returns to standby mode.
Delayed Sending
Your fax can send a document automatically at a preset time. This allows you to take advantage of
lower late-night long-distance rates offered by some telephone companies.
The fax can only register one preset sending operation at a time.
1
Load the document face up into the Document Tray.
See "Loading Documents and Paper" on page 16.
You can set the scanning resolution and contrast (see page 20).
2
Press [Menu].
3
Use [ ] or [ ] to select <FAX OPTIONS>, then press [Start].
4
Use [ ] or [ ] to select <DELAYED TX>, then press [Start].
SET TIME
5
Enter the desired sending time (in 24-hour clock format) using the numeric buttons.
Precede single digits with a zero.
Press [Clear] if you need to re-enter the time.
You can also use [ ] or [ ] to move the cursor.
6
Press [Start].
7
Enter the receiving party's fax number.
You can enter the receiving party's fax number by using the numeric buttons, one-touch
speed dialing, coded speed dialing, or directory dialing (see page 21).
If you use the numeric buttons, press [Start] after entering the number to register it.
8
Press [Start].
Press [Start] when using directory dialing.
The fax scans the document into memory.
Note
If <MEMORY FULL> appears on the LCD during scanning, delete unnecessary documents from
the memory (see page 37), then rescan your fax.
15:00
Sending Faxes 25