Medion LIFE P15010 Guide De Démarrage Rapide page 102

Menu option
SCAN MODE
CHANNEL TYPE
SERVICE TYPE
LOAD PRESETLIST
DISH SETUP
 After you have configured all the settings, press OK. The channel search will then
start.
Set the search mode.
DEFAULT: A search will be carried out on the se-
lected satellite, based on the transponder list
saved for this satellite. This requires a little time.
NETWORK: Activate/deactivate the network scan.
BLIND SCAN: A complete search will be carried
out on the selected satellite. This will also take into
account new transponders that have not been
added to the list of transponders. Two searches
are carried out with the blind scan. The first search
identifies the transponders for the satellite, while
the second search locates the channels. The blind
search takes the longest time.
Decide which channels you want to search for:
FREE (available channels), SCRAMBLED (encrypt-
ed channels) or FREE+SCRAMBLED (available
and encrypted channels).
Select the channel type.
DTV: Search for digital TV channels.
RADIO: Search for digital radio stations.
ALL: Search for digital TV channels and digital ra-
dio stations.
The preinstalled channel list for the Astra 19.2E
satellite is loaded. This search mode takes the least
time. Select YES to load the channel list. Select NO
to start the channel search.
You can configure the same settings here as in the
CHANNEL > DISH SETUP menu option.
Setting
EN
15