Beko BHCA63741BHSI Mode D'emploi page 21

5
Installation of appliance
• Do not place heavy loads on the appliance or
the packaging. The appliance may be damaged.
• Dropping the appliance will render it non-
operational or cause permanent damage.
6
Troubleshooting
Troubleshooting
Appliance is not working. Check your fuses.
Appliance is not working. Check the electrical connection.
Appliance is not working. Check the electrical connection.
Illumination light does
not operate.
Illumination light does
not operate.
Illumination light does
not operate.
Air inlet of the appliance
is inadequate.
Air inlet of the appliance
is inadequate.
Air inlet of the appliance
is inadequate.
Cooker Hood / User Manual
Root Cause
Check the electrical connection.
Inspect the lamp switch.
Inspect the lamps.
Inspect the aluminium filter.
Check the air discharge flue.
Inspect the carbon filter.
Help
Fuse may be blown, inspect and restore it.
Mains voltage shall be between 220 and 240 V.
Check if other appliance in your kitchen ope-
rate.
Mains voltage shall be between 220 and 240 V.
Lamp switch shall be at "on" position.
The lamps of the appliance shall illuminate.
Under normal operating conditions, alumini-
um oil filter shall be cleaned at least once in
a month.
The air discharge flue shall be at "on" position.
The filters of the appliances with carbon filters
shall be replaced once in every 3 months under
normal conditions.
21 / EN