GE 26993 Guide De L'utilisateur page 40

C P
ORDLESS HONE
Problem
Unit beeps
Memory Dialing
doesn't work
C ID
ALLER
Problem
No Display
Caller ID Error Message
40
S (
OLUTIONS CONTINUED
Solution
• Place handset in base for 20 seconds; if it still beeps,
charge battery for 12 hours.
• Clean charging contacts on handset and base with a soft
cloth, or an eraser.
• See solutions for "No dial tone."
• Replace battery.
• Did you program the memory location keys
correctly?
• Did you follow proper dialing sequence?
Solution
• Is battery fully charged? Try replacing the battery.
• Make sure that the unit is connected to a non-switched
electrical outlet. Disconnect the unit from the plug and
plug it in again.
• Did you order Caller ID service from your local telephone
company? The display won't work unless you order Caller
ID service from your phone company.
• The unit displays this message if it detects anything other
than valid Caller ID information during the silent period
after the first ring. This message indicates either the
presence of noises on the line, or that an invalid message
has been sent from the telephone company.
)