Publicité
Les langues disponibles
Les langues disponibles
Service:
♦
Make sure that the appliance is serviced only by special-
ist personnel, and that only original spare parts or acces-
sories are used to replace existing parts/accessories.
♦
CAUTION: There is a risk of fire if the appliance's clean-
ing is not done according to these instructions.
♦ Any misuse or failure to follow the instructions for use
renders the guarantee and the manufacturer's liability
null and void.
DESCRIPTION
A
Control panel
B
Front cover
1
On/off button
Timer button
2
Temperature s
button
3
4
Power setting button
5
On/Off switch
If the model of your appliance does not have the
accessories described above, they can also be bought
separately from the Technical Assistance Service.
INSTRUCTIONS FOR USE
Before use:
♦ To eliminate the smell given off by the appliance
when used for the first time, it is recommended to
have it on at full power for 2 hours in a well-
ventilated room.
♦ Make sure that all product's packaging has been
removed.
♦ Prepare the appliance according to the function you
wish to use:
Use:
♦ Extend the cable completely before plugging it in.
♦ Connect the appliance to the mains.
♦ Turn the appliance on, by using the On/Off switch
( ).
♦
♦
Power setting button
♦
(Original instructions)
Timer function:
♦ To set the timer, the timer indicator would illuminates in a
recycle : 1h,2h,1h+2h,4h,1h+4h,2h+4h,1h+2h+4h,No lights.
The appliance's operating time can be controlled.
♦ To schedule an operating time simply select it using (2).
Heater function
- Press the Power setting button (4) to select
the desi-red heat intensity. The pilot light will
indicate the current mode and heat intensity.
- Press the temperature setting button (3) to
select the desired temperature .
The temperature pilot lights will
indicate the temperature you have selected.
- The thermostat will maintain the temperature
at the desired level.
Temperature setting button (3) : 15,20,25,30
Anti-tipping safety device
♦ This appliance is provided with a safety device which will
switch off the heater in case of accidental tipping over. To
reset, disconnect the plug from the power for a few minutes,
remove the cause of tipping over, then plug the appliance in
again.
Safety thermal protector:
♦ Your heater is fitted with a safety device to switch off the
heater in the event of overheating. If the safety device
operates, please turn the heater off, unplug the
appliance and let it completely cool, inspect for
blockage of air inlet or outlet, then attempt to restart the
heater
Once you have finished using the appliance:
•Turn the appliance off, using the on/off switch.
•Unplug the appliance from the mains.
•Clean the appliance.
ENGLISH
5
Publicité
