Pioneer PDK-50HW3 Mode D'emploi page 9

INSTALLATION
Connect the Unit to the Computer
Connect the unit's USB cable to the computer.
(Connect to the USB1.1 or USB2.0 port.)
USB cable
NOTE:
When connecting a USB hub, use only self-powered
types (with AC outlet power connection) with the
capacity to provide 500mA current.
When a USB cable is connected, the
accompanying screen message will appear:
The power indicator will flash orange, and then flash
alternately in green and orange. Do not touch the
screen while the indicator is flashing, since
automatic settings are being made during this time.
22
En
Computer
How to Use Cable Clip
Use the cable clip to hold the unit's USB cable.
USB Cable
Cable clip