GE 22 Série Manuel D'utilisation Et D'installation page 22

REVERSING THE DOOR SWING
REHANG THE REFRIGERATOR
9
DOOR
Lower the refrigerator door onto the bottom
hinge pin.
Straighten the door and line it up with the center
hinge bracket.
Reinstall the center hinge pin with a 3/4" socket.
Turn it until it extends through the hinge bracket
and into the door.
Hinge Pin
Center Hinge
Bracket
Installation Instructions
22
(CONT.)
REHANG THE FREEZER DOOR
10
Lower the freezer door onto the center hinge pin.
Center Hinge Pin
Lift the top hinge so the pin fits into the door socket.
Support the door on the handle side and make sure
the door is straight and the gap between the doors is
even across the front. While holding the door in
place, tighten the top hinge screws.