Publicité
Liens rapides
SAVE THIS USE AND CARE BOOK
LEASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO
CONSERVER CE GUIDE D'ENTRETIEN ET D'UTILISATION
The Classic
Metal Iron
(English)
Plancha metálica
Fer métallique
?
U.S.A 1-800-231-9786
MEXICO 9-1-800-50833
CANADA 1-800-465-6070
http://www.blackanddecker.com
Black & Decker, S.A. de C.V. 120 V~ 1100 W 60 Hz
MODEL/MODELO/MODÈLE F63D
™
(Español)
(Français)
Publicité
Manuels Connexes pour Black & Decker The Classic F63D
Sommaire des Matières pour Black & Decker The Classic F63D
- Page 1 SAVE THIS USE AND CARE BOOK LEASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO CONSERVER CE GUIDE D’ENTRETIEN ET D’UTILISATION The Classic ™ Metal Iron (English) Plancha metálica (Español) Fer métallique (Français) U.S.A 1-800-231-9786 MEXICO 9-1-800-50833 CANADA 1-800-465-6070 http://www.blackanddecker.com Black & Decker, S.A. de C.V. 120 V~ 1100 W 60 Hz MODEL/MODELO/MODÈLE F63D...
- Page 2 ENGLISH IMPORTANT SAFEGUARDS When using your iron, basic safety precautions should always be followed, including the following: READ ALL INSTRUCTIONS. I Use iron only for its intended use. I To protect against a risk of electric shock, do not immerse the iron in water or other liquid.
- Page 3 before putting away. Loop cord loosely around iron when storing. I Always disconnect iron from electrical outlet when filling with or emptying of water and when not in use. Do not overfill. I Do not operate iron with a damaged cord or plug or if the iron has been dropped or damaged.
- Page 4 — there may be hot water in the reservoir. Avoid rapid move- ment of iron to minimize hot water spillage. I Do not operate in the presence of explosive and/or flammable fumes. SPECIAL INSTRUCTIONS I To avoid a circuit overload, do not operate another high-wattage appliance on the same circuit.
- Page 5 SAVE THESE INSTRUCTIONS POLARIZED PLUG This appliance has a polarized plug—one blade is wider than the other. To reduce the risk of electric shock, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse it. If it still does not fit, contact a qualified electrician.
- Page 6 NEED HELP? (Call the “800” number on the cover.) Service, if necessary, must be performed by a Black & Decker Household Appliance Company-Owned or Authorized Service Center. The Service Center nearest you can usually be found in the yellow pages of your phone book under “Appliances-Small-Repairing”...
- Page 7 FULL ONE-YEAR WARRANTY Black & Decker warrants this product against any defects that are due to faulty material or workmanship for a one-year period after the original date of consumer purchase or receipt as a gift. This warranty does not include damage to the product resulting from accident or misuse. If the product should become defective within the warranty period, we will repair it or elect to replace it free of charge.
- Page 8 ENGLISH 1. Fill Hole 4. Heel Rest 2. Temperature Selector 5. Fabric Guide 3. Steam Button 6. Button Groove For Household Use Only ESPAÑOL 1. Orificio para el llenado de agua 5. Guía coordinada de temperatura/tejido 2. Control de temperatura 6.
- Page 9 HOW TO USE YOUR IRON NOTE: Before first use, remove any labels or stickers on the body or sole- plate of the iron. On first use only, iron over an old cotton cloth for 2 min- utes using steps 1 thru 5 below on set- ting 5 or above with the Steam Button in the "Up"...
- Page 10 appropriate setting for your fabric ACETATE (A). Always stand the iron on its ACRYLIC heel rest when powered on but not SILK NYLON in use. RAYON 4. Use the Fabric Guide on the iron to POLYESTER select the proper temperature setting BLENDS OF COTTON for the fabric to be ironed (B) (check...
- Page 11 STEAM IRONING Be sure there is water in the reservoir. Turn the Temperature Selector between settings 5 and 7. Unlatch the Steam Button to the "Up" position. If steam doesn't start, gently bump the soleplate on the ironing board a few times.
- Page 12 CLEANING Move the Temperature Selector to OFF, unplug the iron and allow the iron to cool completely. Wipe the soleplate and outer surfaces with a soft cloth or sponge dampened in water. Never use abrasives, heavy duty cleansers, or scouring pads that may scratch or discolor the iron. 2.