Télécharger Imprimer la page

Velleman VIS2 Notice D'emploi page 3

Publicité

Les langues disponibles

Les langues disponibles

1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying a Velleman product! This device rotates both clockwise and anticlockwise and starts/stops
instantaneously without skidding. The housing is made of durable plastic. Please read the manual thoroughly before
bringing this device into service. If the device was damaged in transit, don't install or use it and contact your dealer.
2. Installation
3. Angle Adjustment
The tilt angle is adjusted manually (max. 90°). Loosen the screws on the side of the camera platform, adjust the
platform to the desired angle and fix the screws.
The maximum pan angle is 355°. This device is supplied with two stops, each of which is to be inserted in one of the
20 slots in the bottom of the VIS2. Consequently, the stops are placed at a min. interval of 18° (full circle or 360°,
360° / 20 slots = 18°).
4. Specifications
Angular Travel – Pan
Angular Travel – Tilt
Stops
Pan Speed
Max. Load
Construction
Power Source
Power Consumption
VIS2
VIS2 – INDOOR MINI SCANNER
0-355°C, automatic scanning
90° up & down, manual
External and manual adjustment for angular travel
5°/sec
2kg
Plastic
24VAC (incl.)
1W
3
VELLEMAN

Publicité

loading