After Use; Inspection And Repairs; Electrical Safety - Black & Decker RPC1800 Mode D'emploi

ENGLISH

After use

• Switch off, remove the plug from the
socket and let the appliance cool down
before leaving it unattended and before
changing, cleaning or inspecting any
parts of the appliance.
• When not in use, the appliance should be
stored in a dry place. Children should not
have access to stored appliances.

Inspection and repairs

• Before use, check the appliance for
damaged or defective parts. Check for
breakage of parts, damage to switches
and any other conditions that may affect
its operation.
• Do not use the appliance if any part is
damaged or defective.
• Have any damaged or defective parts
repaired or replaced by an authorised
repair agent.
• Before use, check the power supply cord
for signs of damage, ageing and wear.
• Do not use the appliance if the power
supply cord or mains plug is damaged or
defective.
• If the power supply cord or mains plug is
damaged or defective it must be
repaired by an authorised repair agent in
order to avoid a hazard. Do not cut the
power supply cord and do not attempt
to repair it yourself.
• Never attempt to remove or replace any
parts other than those specified in this
manual.
Additional safety instructions for
pasta and rice Cookers
Warning! Do not place near a hot Gas or
electric oven.
• Use the original inner pot only.
• Always position the unit so that the
steam vent is always away from the user.
• Do not use this cooker to boil acid and
alkaline foodstuff, or for other purposes.
• Be sure to keep the space between the
4
All manuals and user guides at all-guides.com
(Original instructions)
inner pot and the heating plate clean and
free of water, dust, rice grains or any
other foreign matter. If not, the cooker's
performance will be affected and in
serious case, its element will burn out.
• Do not use this Rice Cooker to boil water.
• Do not slant the inner pot, otherwise its
bottom will not be in full contact with the
heating plate and its element will burn
out.
• Do not Immerse in liquid.

Electrical safety

Before use, check that the mains voltage
corresponds to the voltage on the rating
plate.
This product must be earthed.
Always check that the mains voltage
corresponds to the voltage on the
rating plate
• Appliance plugs must match the outlet.
Never modify the plug in any way.
• Do not use any adapter plugs with
earthed (Class 1) appliances. Unmodified
plugs and matching outlets will reduce
the risk of electric shock.
• To avoid the risk of electric shock, do not
immerse the cord, plug or appliance in
water or other liquid.
Extension cables & class 1 product
• A 3 core cable must be used as your tool
is earthed and of class 1 construction.
• Up to 30m (100 ft) can be used without
loss of power.
• If the supply cord is damaged, it must be
replaced by the manufacturer or an
authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
Labels on Appliance
The following pictograms along with the
date code are shown on the tool:
Warning! Hot surface.
Warning! Before assembling, switch the
appliance off and remove the plug from the
socket.