Husqvarna BMC 335 Manuel D'utilisation page 16

10. Slowly lower the lift lever to lower the tool drum to
the floor.
11. Turn the depth adjustment wheel counterclockwise
until the depth is correct for the operation.
12. Turn the lock for the depth adjustment wheel to lock
the operation depth.
16
All manuals and user guides at all-guides.com
10 20 30
0mm
a) Turn the lock to unlock the depth adjustment
wheel again for more adjustments of the
operation depth.
13. Turn the speed adjustment knob to set the drive
speed.
To operate the product with the control
panel
WARNING:
operation only. Do not move the product
rearward when the tool drum is in operation.
• Push the joysticks to move the product.
• Adjust the depth if it is necessary. One full revolution
of the depth adjustment wheel adjusts the depth 1.1
mm.
This product is for forward
1816 - 001 - 05.04.2022