Wall Mount Installation - GE 26936 Guide De L'utilisateur

Téléphone sans cordon de 900 mhz à afficheur avec appel en attente et mains libres de 32 voies
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

W
M
ALL
OUNT
Because it is necessary to charge
the handset for 12 hours prior to
connecting the phone for use the
first time, it is better to leave the
unit on a flat surface during initial
charge before attempting to hang it
on the wall.
1. Make sure the wall mount
bracket is securely fastened.
2. Set RINGER switch (on both the
handset and the base) to ON.
3. Place the handset in the base.
4. Connect the power supply cord
into the base and the other end
into an AC outlet. The CHARGE/
IN USE light comes on,
indicating the battery is charging.
Allow the phone to charge
for 12 hours before using the
first time. If you don't
charge the phone properly
when you first set up the
phone, perfomance of the
battery will be compromised.
(Installation continued on the
following page.)
I
NSTALLATION
4
2
CAUTION: Use only the Thomson
5-2470 power supply that is compatible
with this unit. Using other power
supplies may damage the unit.
2
3
1
7

Publicité

Table des Matières
loading

Table des Matières