Eliminating Faults; Accessories - Festo PEV-1/4-B-M12 Notice D'utilisation

PEV-1/4-B-M12
8

Eliminating faults

Fault
PEV-... does not switch
No switching signal given
Fig. 12
9

Accessories

Name
Threaded connector
Connection socket
Mounting plate
Fig. 13
Festo 0005NH– English
Possible cause
Switching point too high
Hysteresis too large
Switch defective
Connection fault
Type
CK-.../CN-...
SIM-M12-4....
SIE-WD-.../SIE-GD-...
APL-2N-PEV
Remedy
Switching point setting see
"Commissioning"
Hysteresis setting see
"Commissioning"
Return PEV-... to Festo
Check the electrical con-
nections of the PEV-...
17