Panasonic CQ-C8803U Manuel D'instructions page 41

Specifications
Power Supply
Tone Controls (Bass/Treble)
Equalizer Center Frequency
Variable Range of Equalizer
Current Consumption
Maximum Power Output
Speaker Impedance
Pre-amp output voltage
Subwoofer-output voltage
Pre-amp output impedance
Subwoofer-output impedance
Dimensions (Main Unit)
Weight (Main Unit)
Sampling Frequency
Pick-Up Type
Light Source
Wavelength
Frequency Response
Signal to Noise Ratio
Total Harmonic Distortion
Wow and Flutter
Channel Separation
FM
Frequency Range
Usable Sensitivity
50 dB quieting Sensitivity
Frequency Response
Alternate channel selectivity
Stereo Separation
Image response ratio
IF response ratio
Signal to noise ratio
AM
Frequency Range
Usable Sensitivity
Power Output:
31 W RMS x 4 Channels at 4 Ω and ≤ 1%
THD+N
Signal to Noise Ratio:
80 dBA (reference: 1 W into 4 Ω)
DC 12 V (11 V – 16 V), Test Voltage 14.4 V, Negative Ground
Bass; ±12 dB at 80 Hz, Treble; ±12 dB at 6 kHz
62.5, 125, 250, 500, 1 k, 2 k, 4 k, 8 k, 16 k (Hz, default)
-12 dB to 12 dB (2 dB step)
Less than 2.5 A (CD mode, 0.5 W 4-Speaker)
70 W x 4 (at 1 kHz)
4 – 8 Ω
5 V (CD mode, 1 kHz, 0 dB)
5 V (CD mode, 1 kHz, 0 dB)
60 Ω
60 Ω
178(W) x 50(H) x 155(D) mm {7" x 1
1.7 kg {3 lbs. 12 oz}
8 times oversampling
Astigma 3-beam
Semiconductor laser
790 nm
20 Hz – 20 kHz (±1 dB)
96 dB (2 V), 106 dB (5 V)
0.01 % (1 kHz)
Below measurable limits
86 dB (5 V)
87.9 MHz – 107.9 MHz
12.2 dBf (1.12 µV, 75 Ω)
15.2 dBf (1.59 µV, 75 Ω)
30 Hz – 15 kHz (±3 dB)
75 dB (MID)
45 dB (at 1 kHz)
75 dB (MID)
100 dB (MID)
62 dB
530 kHz – 1 710 kHz
25 dB/µV (11 V, S/N 20 dB)
Above Specifications comply with EIA standards.
Notes:
¡Specifications and design are subject to modification
without notice due to improvements.
¡Some figures and illustrations in this manual may be
different from your product.
/ "x 6 / "}
15 1
16 8
CQ-C8803U
41