Specifications - Sony SA-W10 Mode D'emploi

Specifications

For the U.S.A. model
Audio power specifications
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 8 ohm loads, from 20 – 20,000 Hz; rated 23 watts
per channel minimum RMS power, with no more than
0.8 % total harmonic distortion from 250 milliwatts to
rated output.
System
Type Active Super Woofer (magnetically shielded
design)
Speaker unit Woofer: 16 cm (6 5 /
Practical maximum output
U.S.A. and Canada
Europe and Malaysia
Other countries
Reproduction frequency range
28 Hz – 200 Hz
High frequency cut-off frequency
50 Hz – 200 Hz
Phase switch NORMAL, REVERSE
Inputs
Input jacks INPUT 1: Input pin jack
INPUT 2: Input terminals
General
Power requirements
Where purchased Models
U.S.A. and Canada All models
Europe All models
Malaysia
SA-W10
Other
models
Other Countries
All models
Power consumption
Dimensions
Mass
Supplied accessories
Design and specifications are subject to change without
notice.
inches), cone type
16
23 W
28 W (8 ohms, DIN)
50 W (MUSIC)
35 W
Power requirements
120 V AC, 60 Hz
220 - 230 V AC, 50/60 Hz
220 - 230 V AC, 50/60 Hz
110 - 120/220 - 240 V AC,
50/60 Hz
110 - 120/220 - 240 V AC,
50/60 Hz
Additional Information
30 W
Approx. 205 x 415 x 365 mm (w/h/d)
× 16 × 14
1 5 3
(8 / / / inches)
16 16 8
8 kg (17 lb 10 oz)
Audio connecting cord
(1 phono plug - 1 phono plug) (1)
Speaker cord (2)
1/10-11_SAW10.11EN 3-810-424-12(1)
EN
11