Ryobi CNS-1801M Manuel D'utilisation page 9

GB
F D E
GENERAL SAFETY RULES
Keep cutting tools sharp and clean. Properly
■
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc.,
■
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from intended could result
in a hazardous situation.
BATTERY TOOL USE AND CARE
Ensure the switch is in the off position before
■
inserting battery pack. Inserting the battery pack
into power tools that have the switch on invites
accidents.
Use power tools only with specifically designated
■
battery packs. Use of any other battery packs may
create a risk of injury and fire.
When battery pack is not in use, keep it away
■
from other metal abjects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or a fire.
Under abusive conditions, liquid may be ejected
■
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
SERVICE
Have your power tool serviced by a qualified
■
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
SPECIFICATIONS
Voltage
Staple speed
Battery pack (Not Included)
Charger (Not Included)
DESCRIPTION
1. Depth Adjustment knob
2. Trigger Switch
3. Handle
All manuals and user guides at all-guides.com
I P NL S DK
English
18 V
40 shots/min
BPP-1817M / BPP-181M
BC-1815S / BC-1800
N FIN GR H CZ
4. Activation Foot
5. Magaeine
6. Latches
7. Battery Pack (Not included)
8. Staples
9. Brads
10. Tabs
OPERATION
WARNING
Do not allow familiarity with tools to make you
careless. Remember that a careless fraction of a
second issufficient to inflict serious injury.
WARNING
Always wear safety goggles or safety glasses
with side shields when operating tools. Failure to
do so could result in objects being thrown into
your eyes, resulting inpossible serious injury.
WARNING
Do not use any attachments or accessories not
recommended by the manufacturer of this tool.
The use of attachments or accessories not
recommended can result in serious personal injury.
APPLICATIONS
You may use this tool for nailing and stapling.
TO INSTALL BATTERY PACK (NOT INCLUDED)
(Fig. 2)
Place on the the battery pack in the drill. Align the
■
raised rib battery pack with the groove inside the drill.
Make sure the latches on each side of the battery
■
pack snap into place and the battery pack is secured
in drill the before beginning operation.
CAUTION
When placing battery pack in the tool, be sure
raised rib on battery pack aligns with the bottom
of the drill and latches into place properly.
Improper installation of the battery pack can
cause damage to internal components.
TO REMOVE BATTERY PACK (NOT INCLUDED)
(Fig. 2)
Locate the latches on the side of the battery pack and
■
depress to release the battery pack from the drill.
Remove the battery pack from the drill.
■
6
RO HR
RUS PL SLO TR