Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
en - Installation and planning notes
Maximum permis-
sible total ducting
length
Mounting the
base (optional)
28
Clear minimum ducting diameter
(metal ducting)
2 3/4" (70 mm)
3 1/8" (80 mm)
3 1/2" (90 mm)
4" (100 mm)
*with optional extraction fan
Once the Rotary Iron has been successfully installed and con-
nected, refit all the housing parts and outer panels that were re-
moved.
Optional accessories
Mounting the optionally available base can raise the machine by
4" (100 mm).
Dismantle the mounting flaps on the left and right sides.
Unscrew the screw-on feet by the maximum amount
( > 2 ⅜" (60 mm)).
Hold the side columns with a suitable aid and remove the screw-on
feet.
Mount the screw-on feet into the base and push the base under the
column.
Screw the base to the base plate of the machine.
Maximum permissible
total ducting length
(exhaust air)
PRI 210*
PRI 214
PRI 217
16.4 ft (5 m)
65.6 ft (20 m)
105 ft (32 m)
131.2 ft (40 m)
Publicité
Chapitres
Table des Matières
