Steps
1. Locate the heatsink on your computer.
2. Disconnect the fan cable from the connector on the system board.
3. Remove the eight (M2x3) screws that secure the heatsink assembly to the system board.
NOTE:
Remove the screws in the order of the callout numbers [1, 2, 3, 4, 5, 6] as indicated on the heatsink.
4. Lift the heatsink assembly out of the computer.
5. Remove the single (M2x3) screw that secures the heatsink fan to the heatsink.
6. Lift the heatsink fan away from the heatsink.
Installation de l'assemblage du dissipateur de chaleur (séparé)
Prérequis
Si vous remplacez un composant, retirez le composant existant avant d'effectuer la procédure d'installation.
À propos de cette tâche
La figure indique l'emplacement du dissipateur de chaleur et fournit une représentation visuelle de la procédure d'installation.
Démontage et remontage
43