Using The Bluetooth Speaker; Functions Of The Buttons On The Bluetooth Speaker - SilverCrest HG00595D Instructions D'utilisation Et Consignes De Sécurité

Using the Bluetooth speaker

Establishing a Bluetooth
Remove all plugs from the AUX stereo jack
before you establish Bluetooth
Press and hold the
LED flashes blue and a beep sounds. The
2
speaker will now attempt to connect to the play-
back device (e.g. smartphone or computer).
Switch on the playback device and approve the
connection. Please note the requirements of the
software on the playback device. The signal LED
will light up blue and a beep sound.
The speaker identification on the playback device
will be HG00595.
The maximum range of the connection is approx.
10 m, but may be reduced to the geometry of the
space (obstructing furniture, walls, etc.).
The playback device must support Bluetooth
standard 3.0. Otherwise you may not be able to
use all the functions listed below.
Functions of the buttons on the
Bluetooth speaker
Start a playlist on your playback device. Set the
volume on the playback device to Maximum. The
volume on the Bluetooth
described below. Music is played back through the
speakers .
1
connection:
®
radio link.
®
until the signal
button 10
speaker can be adjusted as
®
7
®
GB/IE 39