GE IM6D Manuel Du Propriétaire Et Instructions D'installation page 35

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PLUG IN THE ICEMAKER
5
Holding the icemaker in place, insert the icemaker
power cord plug into the socket on the side wall,
making sure the prongs and holes are matched.
Press the plug firmly into the socket. Lock the plug
in place by clipping the restraints onto each side of
the plug. Make sure the restraints click into place
and the power cord is still in the hook on the back
of the icemaker
MOUNT THE ICEMAKER
6
already installed in the refrigerator fits in the fill
cup opening. Hang the icemaker on the two
mounting screws in the side wall.
Make sure:
fill tube extends into the fill cup opening on
refrigerator to make sure the fill tube has not been
pushed out of the back of the refrigerator).
the uppermost position of the mounting slots on
the icemaker bracket.
THEN SECURELY TIGHTEN THE ICEMAKER
MOUNTING SCREWS.
49-60704-2
Installation Instructions
OFF.
REINSTALL THE SHELF SUPPORT,
7
BUCKET, SHELF AND BASKET
Replace the center vertical shelf support, ice
bucket, chiller shelf and storage basket by
reversing the steps in Step 1.
ATTACH WARRANTY LABEL
8
A label
date of installation for warranty purposes. Apply it
to the back of the refrigerator.
KEEP THIS MANUAL
9
The warranty for the icemaker is printed in
this manual. Keep this manual with your
Refrigerator Owner's Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Water Valve Assembly
section.
35

Publicité

Table des Matières
loading

Table des Matières