Télécharger Imprimer la page

Drum Kit Common Parameters; Volume; Drum Reverb Send; Hi-Hat Sensitivity - Yamaha DTXPRESS II Mode D'emploi

Masquer les pouces Voir aussi pour DTXPRESS II:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

5. Drum Kit Common Parameters

This function sets the common settings for the entire drum kit.
The Drum Kit Common Parameters are divided into the following
5 pages.

5-1. Volume ............................................................ 23

5-2. Drum Reverb Send .......................................... 23

5-3. Hi-Hat Sensitivity ............................................. 23

5-4. Song Select ..................................................... 23

5-5. Drum Kit Name ................................................ 23

5-1. Volume

Sets the overall volume for the drum voice.
KIT Common
Volume=
q Volume
[Range] 0-127

5-2. Drum Reverb Send

Sets the overall reverb send level of the drum voice.
KIT Common
DrumRevSend
q DrumRevSend (Drum Reverb Send Level)
[Range] 0-127
The actual reverb send level will be determined by multiplying the
reverb send level set in [2-2. Reverb Send] (P. 19) with the value
set here.

5-3. Hi-Hat Sensitivity

Sets the foot controller sensitivity connected to HI-HAT CON-
TROL jack on the rear panel.
KIT Common
HH Sensitivty=32
q HH Sensitivty
[Range] 0-63
Larger values provide higher sensitivity.
127
q
q
40
q

5-4. Song Select

This parameter allows you to switch the main song q at the same
time the drum kit is switched.
KIT Common
SongSel=110ƒ=120
q
q Song Select (Song Number)
[Range] —, 1-127
Assign the song number to select the song for playback. The song
will not be switched if the setting is set to "---".
w q (Tempo)
[Range] —, 30-300
Assign the tempo that will be used. If "---" is set, the tempo will
not change .

5-5. Drum Kit Name

Changes the drum kit name that is currently selected for editing.
KIT Common
Kit=Acoustic Kit
q Kit (Drum Kit Name)
Procedure
1. In the display shown above, use the [SEL<]/[SEL>] but-
tons to move the cursor to the character you want to
change.
2. Use the [VALUE–]/[VALUE+] buttons to select the alpha-
bet, number or symbol.
3. Repeat steps 1 and 2 above to create the Drum Kit Name
using a maximum of 12 characters.
G The available characters to choose from are (in order):
space
!"#$%&'()*+,-./0123456789:;<=>?@
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`
abcdefghijklmnopqrstuvwxyz{|}ßå
Drum Kit Voice Edit Mode
w
q
23

Hide quick links:

Publicité

loading