Cd Player Operation - Sony Aiwa CDC-X30MP Mode D'emploi

Presetting stations automatically
(Auto Memory)
1
Press TU (TUNER) repeatedly to select the desired
band (F1, F2, F3, A1, or A2).
2
Press and hold PS/A.ME until automatic presetting
starts.
The unit automatically stores up to 6 stations for
each band.
After completion of automatic presetting, the unit
tunes in to all the stations stored on the preset
station buttons in order (Preset Scan).
To cancel automatic presetting, press PS/A.ME again.
Checking the preset stations (Preset Scan)
1
Press PS/A.ME briefly.
Each preset station will be tuned in for 5 seconds in
order.
To cancel Preset Scan, press PS/A.ME again or any
preset station button.
Presetting stations manually
(Manual Memory)
1
Press TU (TUNER) repeatedly to select the desired
band (F1, F2, F3, A1, or A2).
2
Press + or - to tune in to a desired station (see
"Tuning in to a station" as well for another tuning
method).
3
Press and hold the desired preset station button until
the unit beeps.
Note
A newly preset station replaces the station on the same
band that was previously stored on that preset station
button.
Tuning in to a preset station
1
Press TU (TUNER) repeatedly to select the desired
band (F1, F2, F3, A1, or A2).
2
Press the preset station button on which the desired
station is stored.
Active tuning reception control (ATRC)
The unit automatically suppresses FM noise caused by
vehicle movement, and maintains sound quality.
5
ENGLISH

CD PLAYER OPERATION

Playing a CD
You can play CDs, CD-Rs and CD-RWs using the
procedure described below.
Jog dial (PUSH-SOURCE)
t/g, r/f
1
Insert a CD.
"DISC" appears on the display.
CD play starts.
If a CD is already inserted, press Jog dial (PUSH-
SOURCE) repeatedly to select CD play mode.
In normal play, when the last track finishes, the unit
returns to the first track and continues to play.
Labeled-side up
Track number Elapsed playing time
z
INT REP1 SHUF
CD indicator