Philips 5000 Serie Manuel D'utilisation page 19

5 Remove the shaving heads from the shaving head
6 Place the new shaving heads in the shaving head
7 Place the retaining rings back onto the shaving
1
2
- Turn the ring clockwise until your hear a click to
holder.
Discard the used shaving heads immediately to
avoid mixing them with the new shaving heads.
holder.
Note: Make sure that the projections of the shaving
heads fit exactly into the recesses of the shaving
head holder.
heads and turn them clockwise to reattach the
retaining rings.
Each retaining ring has two recesses and two
projections that fit exactly in the projections and
recesses of the shaving head holder.
indicate that the ring is fixed.
Note: Hold the shaving head holder in your hand
when you reinsert the shaving heads and reattach
the retaining rings. Do not place the shaving head
holder on a surface, as this may cause damage to
the shaving heads.
19
English