Inspection Before Use - Panasonic EY4541 Instructions D'utilisation

Masquer les pouces Voir aussi pour EY4541:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38
Symbol
Meaning
V
Direct current
n
No load speed
0
Revolutions or reciproca-
-1
...min
tions per minutes
Electrical capacity of
Ah
battery pack
To reduce the risk of
injury, user must read
and understand instruc-
tion manual.
For indoor use only.
WARNING:
• Do not use other than the Pana-
sonic battery packs that are de-
signed for use with this rechargea-
ble tool.
• Panasonic is not responsible for
any damage or accident caused
by the use of the recycled battery
pack and the counterfeit battery
pack.
• Do not dispose of the battery pack
in a fire, or expose it to excessive
heat.
• Do not drive the likes of nails into
the battery pack, subject it to
shocks, dismantle it, or attempt to
modify it.
• Do not allow metal objects to
touch the battery pack terminals.
• Do not carry or store the battery
pack in the same container as
nails or similar metal objects.
• Do not charge the battery pack in
a high-temperature location, such
as next to a fire or in direct sun-
light. Otherwise, the battery may
overheat, catch fire, or explode.
• Never use other than the dedi-
cated charger to charge the bat-
tery pack. Otherwise, the battery
may leak, overheat, or explode.
• After removing the battery pack
from the tool or the charger, always
reattach the pack cover. Otherwise,
the battery contacts could be
Volts
III. ASSEMBLY

Inspection before use

Installing and removing the blade
Installation
1. Wipe away any cutting dust from the
2. Lift up the blade Attach/Remove lever.
- 10 -
shorted, leading to a risk of fire.
• When the Battery Pack Has Dete-
riorated, Replace It with a New
One. Continued use of a dam-
aged battery pack may result in
heat generation, ignition or bat-
tery rupture.
WARNING:
To reduce the risk of injury, always
remove battery pack before changing
the blade.
• Has the correct jigsaw blade been
attached for the object to be cut?
• Has the correct stem shape and
thickness
of
the
mounted?
• Check if the blade is fixed securely?
• Check if the blade is cracked or broken.
• Check that there are no foreign objects
in the object to be cut.
blade and the blade clamp bracket.
blade
been

Publicité

Table des Matières
loading

Table des Matières