Locking The Wheels - Husqvarna HTC T6 Manuel De L'opérateur

HTC DURATIQ

7.1.5 Locking the Wheels

Machines with radio control are equipped with a locking mechanism on each wheel. Wheel
locking is used to lock and release the machine's wheels from their drive motors. In the
locked position, the drive motors are connected to the wheels, this means that the machine
can only be moved by using the drive motors via the operating panel or the remote control.
Release the wheels by pulling the locking pin straight out. Turn the locking pin 90 degrees
and release it for the secured position.
46
Accessories
D002998, 02.00