Table Des Matières; Pedestal Safety; Installation Requirements; Tools And Parts - Whirlpool WHP0400VW Instructions D'installation

PEDESTAL SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
INSTALLATION REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Tools and Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Location Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Before Installing the Pedestal . . . . . . . . . . . . . . . . . . . . . . . .3

Tools and Parts

Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
Tools needed
utility knife
I
1/4" hex head ratchet or open-end wrench
I
5/16" hex head ratchet or open-end wrench
I
14 mm open-end wrench
I
level
I
9/16" open-end wrench
I
pliers or slip-joint pliers
I
bucket
I
Parts supplied
four #12 x 5/8" hex head sheet metal screws (in parts bag)
I
two adjustable feet (in parts bag)
I
Installation Instructions
I
NOTE:
If the pedestal is to be installed under a washer, use the
feet that were factory installed on the washer for the pedestal
installation, and save the two adjustable feet supplied in the parts
bag for use with dryer pedestal installation.
2
TABLE OF CONTENTS

PEDESTAL SAFETY

INSTALLATION REQUIREMENTS

INSTALLATION INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Installing the Pedestal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Complete the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . .5
COMMERCIAL PEDESTAL WARRANTY . . . . . . . . . . . . . . . . . . . . . . .6

Location Requirements

NOTE: If the dryer and pedestal assembly is located in a garage,
15.5" (39.4 cm) must be added under the pedestal so that the
dryer is 18" (46 cm) above the garage floor.