Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSERTING WIRE SHELVES AND OTHER ACCESSORIES IN THE OVEN
The wire shelf and other accessories are provided with a locking mechanism to prevent their accidental
removal.
Fig. 1
1.
Insert the wire shelf horizontally, with the raised part "A" 'upwards (Fig. 1).
2.
Angle the wire shelf when it reaches the locking position "B" (Fig. 2).
Fig. 2
3.
Return the wire shelf to the horizontal position and push it in fully to "C" (Fig. 3).
4.
To remove the wire shelf proceed in reverse order.
The other accessories, like the drip tray and baking tray, are inserted in exactly the same way. The
protrusion on the flat surface enables the accessories to lock in place.
CONTROL PANEL DESCRIPTION
1
1.
Function selector knob
2.
Cooking time selector knob
3.
Thermostat knob
N.B.: the knobs are retractable. Press the knobs in the middle and they pop up.
4.
Thermostat led
HOW TO OPERATE THE OVEN
•
Turn the selector knob to the required function.
The oven light switches on.
•
Turn the thermostat knob clockwise to the required temperature.
The thermostat led lights up, switching off again when the oven reaches the selected temperature.
At the end of cooking, turn the knobs to "0".
COOKING TIME SELECTOR
This selector can be used to set a cooking time of between 1 and 120 minutes.
To set cooking time, after selecting the required cooking function, turn the knob right
round in an clockwise direction and then turn it back in the opposite direction to the
desired cooking duration. At the end of the cooking time the oven switches off and the
selector remains positioned at "0".
To use the oven in manual mode, i.e. without setting a cooking time, make sure that the
programme selector is turned to the symbol " ".
ATTENTION: When the selector is positioned at "0" the oven will not switch on.
To switch the oven on, set the selector to the symbol " " or set a cooking time.
Fig. 3
2
3
4
GB8
Publicité
Table des Matières
