Mounting Touch Panel - Panasonic TY-TP42P30K Mode D'emploi

Mounting Touch Panel

Notes
Two or more people are always required for mounting.
•
Never mount the main device in the way that is overlapped from above the touch panel while the touch
•
panel is laid down.
Doing so may damage the touch panel.
1
Fit the assembled touch panel from the front side of the main device.
Note
There should not be a space between the touch panel and the
•
front surface of main device.
The procedure for vertical posture is the same.
Mount in the way that the USB port becomes lower left when
seen from the front.
2
Prepare the mounting brackets B.
Mounting bracket B
3
As shown in the figure below, attach the mounting brackets B to the mounting brackets A (for top side) on
the left and right of the top side.
Temporarily fix the screws.
Attach on the left and right of the bottom side in the same way.
Attaching to the top side
Mounting bracket B
Attaching to the bottom side
All manuals and user guides at all-guides.com
Temporarily fix the mounting screws B. (2 or 3 turns)
Mounting bracket B
Securely insert the projection of the
mounting bracket B to the cutout.
Securely insert the projection of the
mounting bracket B to the cutout.
29