Table des Matières
Publicité
Safety, performance, and dependability have been given
top priority in the design of your portable fan.
INTENDED USE
The portable fan is intended for general ventilation of most
household spaces.
Do not use the product in any way other than those stated
for intended use.
WARNING
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
FAN SAFETY WARNINGS
■
Know the product. Read operator's manual
carefully. Learn its applications and limitations, as
well as the specific potential hazards related to this
tool. Following this rule will reduce the risk of electric
shock, fire, or serious injury.
■
Do not disassemble the product.
■
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to
possible serious personal injury.
■
Do not use this product if it is not completely
assembled or if any parts appear to be missing or
damaged. Use of a product that is not properly and
completely assembled could result in serious personal
injury.
■
Do not use this product to exhaust hazardous or
explosive materials and vapors. It is intended for
general ventilating use only.
■
Do not open or modify the product, otherwise the
warranty will be voided.
■
To reduce the risk of injury, close supervision is
necessary when a product is used near children.
■
Do not allow children to operate this product. It is
not a toy.
■
Cleaning and user maintenance shall not be made
by children without supervision.
■
Never leave the product running unattended.
Remove the battery pack after use.
■
To reduce the risk of personal injury and electric
shock, the portable fan should not be played with or
placed where small children can reach it.
■
It is possible that unsecured hair may be drawn
into this fan and may be come entangled and may
cause injury. Keep loose or flying hair away from
this product at all times.
■
Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
when not using your battery tool or when changing
accessories. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
■
Do not place battery tools or their batteries near
fire or heat. Following this rule will reduce the risk of
explosion and possibly injury.
■
Never use a battery that has been dropped or
received a sharp blow. A damaged battery is subject
to explosion. Properly dispose of a dropped or damaged
battery immediately.
■
Batteries can explode in the presence of a source
of ignition, such as a pilot light. To reduce the risk of
serious personal injury, never use any cordless product
in the presence of open flame. An exploded battery
can propel debris and chemicals. If exposed, flush with
water immediately.
■
Do not charge battery tool in a damp or wet location.
Following this rule will reduce the risk of electric shock.
■
Do not expose the product to rain. Water entering
the product will increase the risk of electric shock or
malfunction.
■
For best results, your battery tool should be
charged in a location where the temperature is
more than 10°C (50°F) but less than 38°C (100°F).
Do not store outside or in vehicles.
■
Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in
contact with your skin, wash immediately with soap
and water. If liquid gets into your eyes, flush them
with clean water for at least 10 minutes, then seek
immediate medical attention.
■
Keep the product dry, clean and free from oil and
grease. Always use a clean cloth when cleaning.
■
Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If you
loan someone this tool, loan them these instructions
also to prevent misuse of the product and possible
injury.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps
EN
English
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
EL
TR
UK
1
Publicité
Table des Matières
