Product Overview; Battery Charger Safety; Accessories - Husqvarna 120i Manuel D'utilisation

Masquer les pouces Voir aussi pour 120i:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
Statement....................................................................... 3

Battery charger safety.....................................................3

This leaflet is used to add a new charger type of 40-C80.

PRODUCT OVERVIEW

(Fig. 1)
WARNING:
safety warnings and all instructions in the
Operator's manual. Failure to obey the
warnings and instructions may result in
electrical shock, fire and/or serious injury.
To connect the battery charger
1. Connect the battery charger to the voltage and
frequency that is specified on the rating plate.
2. Put the plug in a grounded socket outlet.
Note:
The battery does not charge if the battery
temperature is more than 50 °C/122 °F. If the
temperature is more than 50 °C/122 °F, the battery
charger makes the battery become cool.
To charge the battery
Note:
Charge the battery if it is the first time that you
use it. A new battery is only 30% charged.
Approved battery chargers for the product
Battery charger
Mains voltage, V
Frequency, Hz
Power, W
Output Voltage, V d.c/Amps, A
1820 - 002 -
Contents
Operation........................................................................ 3

Accessories.................................................................... 3

Statement
1. Charging LED
2. Connector
3. Battery charger 40-C80
Battery charger safety
Read all
Operation
1. Connect the battery to the battery charger. (Fig. 2)
2. Make sure that the green charging light on the
3. When all LEDs on the battery come on, the battery is
4. To disconnect the battery charger from the mains
5. Disconnect the battery from the battery charger.
Note:
manuals for more information.
Accessories
40-C80
100-240
50-60
72
43/1.6
CAUTION:
other battery chargers than the one supplied
for your product. Only use QC80/40-C80
chargers when you charge BLi replacement
batteries.
battery charger comes on. That means that the
battery is connected correctly to the battery charger.
(Fig. 3)
fully charged. (Fig. 4)
socket, pull the plug. Do not pull the cable.
Refer to the battery and battery charger
Do not use
3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

120i-30sn

Table des Matières