Associated Documentation; Supplementary Documentation; Manufacturer's Certificates; Extended Order Code - Endress+Hauser Levelflex FMP51 Mode D'emploi

XA00497F-C

Associated documentation

Supplementary
documentation

Manufacturer's certificates

Extended order code

14
This document is an integral part of the following Operating Instructions:
BA01001F/00 (FMP51/52/54), BA01003F/00 (FMP55)
The Operating Instructions pertaining to the device apply.
Explosion-protection brochure:
CP00021Z/11
The Explosion-protection brochure is available:
• In the download area of the Endress+Hauser website: www.endress.com  Download  Advanced
 Documentation Code: CP00021Z
• On the CD for devices with CD-based documentation
EC Declaration of Conformity
→  3
EC type-examination certificate
Certificate number:
KEMA 10 ATEX 0093 X
IEC Declaration of Conformity
Certificate number:
IECEx KEM 10.0043 X
Affixing the certificate number certifies conformity with the standards under www.IECEx.com
(depending on the device version).
• IEC 60079-0 : 2011
• IEC 60079-11 : 2011
• IEC 60079-15 : 2010
• IEC 60079-26 : 2006
The extended order code is indicated on the nameplate, which is affixed to the device in such a way
that it is clearly visible. Additional information about the nameplate is provided in the associated
Operating Instructions.
Structure of the extended order code
FMP5x - ************* + A*B*C*D*E*F*G*..
---------------- -----------------------
Device type Basic specifications
* = Placeholder
At this position, an option (number or letter) selected from the specification is displayed instead
of the placeholders.
• Basic specifications
The features that are absolutely essential for the device (mandatory features) are specified in the
basic specifications. The number of positions depends on the number of features available.
The selected option of a feature can consist of several positions.
• Optional specifications
The optional specifications describe additional features for the device (optional features).
The number of positions depends on the number of features available.
The features have a 2-digit structure to aid identification (e.g. JA). The first digit (ID) stands for the
feature group and consists of a number or a letter (e.g. J = test, certificate). The second digit
constitutes the value that stands for the feature within the group (e.g. A = 3.1 material (wetted
parts), inspection certificate).
More detailed information about the device is provided in the following tables. These tables describe
the individual positions and IDs in the extended order code which are relevant to hazardous locations.
---------------------------
Optional specifications
Levelflex
Endress+Hauser