LEGRAND 430 522 Manuel D'utilisation page 25

TERMINAL COVER DISASSEMBLY
a Remove the Lockup Screw as shown bellow
TERMINAL COVER ASSEMBLY
c Check if the summit of the Plate Spring
is located at the arrow mark as shown in
the dotted circle.
b Turn main body on its axis in
CCW(Counter-clockwise) direction and
separate it from Terminal Cover.
d Check the 2 mold line for assembly
before starting assembly. Line up the
mold lines as shown in the dotted
circle and turn main body on its axis in
CW(Clockwise) direction and assemble
main body to Terminal Cover. After
assembling them, screw main body to
Terminal Cover to protect them from
separation by vibration and so on.
25