Reset Function - Velleman RCQC3 Mode D'emploi

RCQC3

Reset Function

Switch on your quadcopter. Wait for the Push and hold the throttle stick completely
orientation LEDs to blink slowly. downwards.
Place the quadcopter on a flat surface. Push
the throttle and cyclic sticks to the bottom-
right corner until the LEDs blink rapidly.
Switch on your remote control. The LEDs
Release the sticks. Resetting has been
should burn steadily.
completed when the LEDs burn steadily. Re-
synchronize the remote control and
quadcopter as described above.
V. 01 – 11/07/2016 10 ©Velleman nv