Install The Driver - Panasonic CF-VEBU11AU Instructions D'utilisation

Install the Driver

If the message to inform of the new hardware detection is displayed when the computer
is connected to this cradle for the first time, click [Cancel] to close the display, and then
install the LAN driver according to the following procedure.
Preparation
Prepare the following items:
• Cradle Driver CD-ROM (included)
• USB CD/DVD drive (optional) (refer to recent catalogs and other sources for
information about the products available)
Remove all peripherals (except for this Cradle and the CD/DVD drive).
Connect the AC adaptor and do not remove it until installation is complete.
1
Connect the CD/DVD drive to the USB port of the computer
or this cradle.
E
2
Set the Cradle Driver CD-ROM into the CD/DVD drive.
3
Restart the computer.
4
Log on to Windows as an administrator.
Windows Vista
5
When [Found New Hardware] is displayed, click [Locate and
install driver software(recommended)].
6
When [Found New Hardware – LAN xxxx] is displayed, click
[Next].
7
Click [Close].
Windows XP
5
When the Add Hardware Wizard appears, select [No, not this
time] and click [Next].
6
Select [Install the software automatically(recommended)]
and click [Next].
7
Click [Finish].
8
Remove the Cradle Driver CD-ROM.
9
Restart the computer.
1