Definitions: Safety Guidelines; Tool Specifications - DeWalt DC608 Guide D'utilisation

FIG. 1
D
E
F
K
G
A
H
I
A. Trigger
B. Contact trip lock-off
C. Depth adjustment wheel
D. Headlights/low
battery/jam indicator
E. Jam clearing latch
F. Contact trip
G. Magazine
Nail
Lengths
Shank Diameters
Nail Stick Angles
B
J
H. Pusher latch
I. Bump/sequential
selector switch
J. Reversible suspension
hook
K. Low nail indicator
5/8", 3/4", 1", 1-1/8", 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-1/2", 1-9/16", 1-3/4", 2"
(16 mm, 19 mm, 25 mm, 29 mm, 30 mm, 32 mm, 33 mm, 35 mm, 38 mm, 40 mm, 44 mm, 50 mm)
C
The definitions below describe the level of severity for
each signal word. Please read the manual and pay
attention to these symbols.
tion which, if not avoided, will result in death or serious
injury.
tion which, if not avoided, could result in death or seri-
ous injury.
which, if not avoided, may result in minor or moderate
injury.
CAUTION: Used without the safety alert symbol indi-
cates a potentially hazardous situation which, if not
avoided, may result in property damage.
NAIL SPECIFICATIONS
Straight
18 gauge
0˚
2

Definitions: Safety Guidelines

DANGER: Indicates an imminently hazardous situa-
WARNING: Indicates a potentially hazardous situa-
CAUTION: Indicates a potentially hazardous situation

TOOL SPECIFICATIONS

Firing Mode Selective
Voltage 18
Height 11.25" (286 mm)
Width 3.5" (89 mm)
Length 11.5" (292 mm)
Weight 7.5 lbs. (3.4 kg)
Magazine Angle 0˚
Loading Capacity Up to 110 nails