Publicité
Les langues disponibles
Les langues disponibles
Connection using an audio connecting cord (not supplied)
Amplifier
Connection using speaker cords (not supplied)
Amplifier
Selecting the amplifier
Excessive sound volume may damage the speakers, so be aware of the position of the
volume level knob on the amplifier and avoid excessive input.
Connecting to the amplifier
Use the LINE IN jacks or the SPEAKER IN terminals of the subwoofer when you connect
the amplifier.
If your amplifier has one of the following types of output jacks, connect the LINE IN jack
and the amplifier's jack using the supplied audio connecting cord.
MONO OUT jack
MIX OUT jack
SUBWOOFER output jack(s)
SUPER WOOFER output jack(s)
If your amplifier does not have the above mentioned output jacks, connect the speaker
terminals of the amplifier to the SPEAKER IN terminals instead.
Before you get started
Turn off the power of the amplifier and the subwoofer before making any connection.
Use the audio connecting cords that are supplied to the respective equipment. If there are
not enough audio connecting cords to make the necessary connections, you need to
purchase some optional audio connecting cords.
Be sure to make connections firmly to avoid noise.
Connection using an audio connecting cord (not
supplied)
Connect the MONO OUT jack of your amplifier to the LINE IN jack of the subwoofer with
the audio connecting cord (not supplied).
Note
If the output level of your amplifier is not high enough, the sound may not be loud enough.
In this case, connect the speaker terminals of the amplifier directly to the SPEAKER IN
terminals of the subwoofer.
3
GB
This subwoofer
Signal flow
Audio connecting cord (not supplied)
This subwoofer
Speaker cords (not supplied)
Binding post
When using two or more subwoofers
Amplifier
This
subwoofer
: Signal flow
Connection using speaker cords (not supplied)
Connect the SPEAKER IN R terminals to the right speaker terminals of the amplifier, and
connect the SPEAKER IN L terminals to the left speaker terminals of the amplifier.
Note
Tighten each binding post securely. Periodically checking the tightness of the binding posts
is recommended to prevent them from becoming loose as time passes.
When using two or more subwoofers
Install the subwoofers on both the left and right sides.
Connect the terminals of the right subwoofer and the front right speaker to the right
speaker terminals of the amplifier, and connect the terminals of the left subwoofer and the
front left speaker to the left speaker terminals of the amplifier.
Front right
speaker
This subwoofer
(Right)
Amplifier
Speaker cords (not supplied)
Another
subwoofer
Front left
speaker
This subwoofer
(Left)
Publicité
