Daily Maintenance - Husqvarna DS900 DD Manuel D'utilisation

• Use the feed handle to see if the feed housing moves
smoothly on the column. If not, adjust the rollers
again.
• Then tighten the two hexagon screws.
Repairs
IMPORTANT! All types of repairs may
!
only be carried out by authorised
repairmen. This is so that the operators
are not exposed to great risks.
MAINTENANCE

Daily Maintenance

1 Check that nuts and screws are tight.
2 Clean the outside of the machine.
3 Check that the feed crank can be moved without
resistance.
4 Check that the gearing moves easily and does not
cause any noise.
5 Check for any wear or damage on the column.
6 Check that the feed housing can be moved easily and
does not backlash against the stand column.
7 Make sure there is no other damage to the stand.
–
English 13