Wiring Diagram (Recommended System) - Panasonic CY-VHD9401U Instructions D'installation

Electrical Connections
E
N
G
L
I
S

Wiring Diagram (Recommended System)

H
19
CY-VHD9401U/CY-VHD9401L
VTR(2)-IN
Video
REMOTE-OUT
R (red)
(yellow)
(Black)
L (white)
VIDEO-CONT
(Green/yellow stripe)
VTR1-IN
RCA cord
Video game (option)
(option)
Example of system combination:
≥ CD player/receiver (CQ-C9801U, option)
≥ DVD changer (CX-DH801U, option)
≥ Video game (option)
≥ VCR, etc. (option)
32
CY-VHD9401U/L
(continued)
L (white)
R (red) RCA cord (option)
RCA cord (option)
REMOTE-IN
Video (yellow)
L (white)
R (red)
VIDEO-CONT
Video (yellow)
L (white)
R (red)
Front speaker cord
FRONT SP
L (white)
AUX1-IN
Rear
R (red)
speaker
cord
REAR SP
CQ-C9801U (option)
CX-DH801U (option)
or
Camcoder
(option)
or
VCR (option)
+
-
Front speaker
(option)
+
-
+
-
Rear speaker
(option)
+
-
By performing this connection, remote control
signals can be received by this unit (CY-VHD9401U/
CY-VHD9401L).
(Do not connect the remote control signal receiver
supplied with CX-DH801U when this connection
has been performed.)
Connections:
≥ Connect this unit's (CY-VHD9401U/
CY-VHD9401L) remote-out cord to the
REMOTE-IN connector on the DVD changer
(CX-DH801U, option) using an RCA cord
(option).
≥ Connect this unit's (CY-VHD9401U/
CY-VHD9401L) video control lead to the DVD
changer's (CX-DH801U, option) video control
lead.
≥ For wiring, carefully read the operating
instructions for the devices connected.
Remote control unit:
≥The remote control unit supplied with
the CX-DH801U must be used to
operate the DVD changer (CX-DH801U,
option). To use it to perform operations,
point it at the remote control signal
sensor of this unit (CY-VHD9401U/
CY-VHD9401L).
[The DVD changer (CX-DH801U, option) cannot
be operated using this unit's (CY-VHD9401U/
CY-VHD9401L) remote control unit.]
CY-VHD9401U/L
E
N
G
L
I
S
H
20
33