Checking Wiring And Connectors; Exhaust Leakage; Water Leakage - Yamaha E8D Manuel D'utilisation

4-17
2) Verify whether the idle speed is set to
specification. For idle speed specifica-
tions, see "Specifications" in this chap-
ter.
NOTE:
Correct idling speed inspection is only pos-
sible if the engine is fully warmed up. If not
warmed up fully, the idle speed will measure
higher than normal. If you have difficulty
verifying the idle speed, or the idle speed
requires adjustment, consult a Yamaha
dealer or other qualified mechanic.
EMU03830
CHECKING WIRING AND
CONNECTORS
1) Check that each grounding wire is
properly secured.
2) Check that each connector is engaged
securely.
EMU03840

EXHAUST LEAKAGE

606011
Start the engine and check that no exhaust
leaks from the joints between the exhaust
cover, cylinder head and crank case.
EMU03850

WATER LEAKAGE

Start the engine and check that no water
leaks from the joints between the exhaust
cover, cylinder head and crank case.
E